_dvHAMaster.png?sw=960&sh=960&sm=fit&sfrm=png)
Kappa One
800 Watt Class-D Mono Subwoofer Amplifier
Sold from 2008 until now
Documents & Downloads
Product Specifications
- Signal-to-noise ratio
- 85dBA (1W/4 ohms)*
- Signal-to-noise ratio
- 112dBA (rated power into 4 ohms)
- Frequency response
- 20Hz – 320kHz (–3dB)
- Dimensions (L x D x H)
- 329mm x 179mm x 44mm
- CEA Rated
- Yes
- Amplifier Power (RMS)
- 800 watts x 1 channel @ 2 ohms and ≤1% THD + N
- Signal-to-Noise Ratio
- 85dBA (reference 1 watt into 4 ohms)
- Frequency Response
- 20Hz – 320Hz (-3dB)
- Effective Damping Factor
- 6.3 @ 4 ohms
- Maximum Input Signal
- 6V
- Input Sensitivity
- MAXIMUM... 200mV
- MSRP U.S.
- $549.95 each
- Dimensions
- 13 inch Long x 7-1/16 inch Wide x 1/3/4 inch High
800 Watt Class-D Mono Subwoofer Amplifier with on-board electronic crossover and DBO (Dynamic Bass Optimization Circuit). Its compact footprint is only 13 inch x 7-1/16 inch x 1-3/4 inch, making it idea for tight installations.
Kappa amps feature high-power Class D circuit topology with DirectFET® transistors, a design that increases power output and overall efficiency, with improved heat transfer from the transistors to the chassis.
DBO is a proprietary variable subsonic filter with variable bass boost. Unlike conventional fixed-frequency filters, DBO conserves power at frequencies below 100Hz, protecting woofers in vented-box applications from overexcursion, and flattening response through the lowest octaves in sealed-box and infinite-baffle applications.
Kappa amps use differential-signal inputs with high common-mode noise rejection for all speaker-level and line-level outputs from source units. Because noise from the vehicle’s alternator and other electrical components is radiated into the positive and negative leads of each signal input equally, amplifying the difference between the leads effectively cancels out the noise, leaving only the music.
Kappa amps feature smart circuitry to protect your speakers in the event of short circuits or problems with your battery, alternator or voltage regulator. They also protect themselves against excess heat, with circuits that cool the amplifier down by gradually reducing output without shutting it down completely.
At just 1-3/4" high, Kappa amps will fit under most seats.
Images & Videos
_dvHAMaster.png?sw=300&sh=300&sm=fit&sfrm=png)
_dvHAMaster.png?sw=300&sh=300&sm=fit&sfrm=png)
Can’t find what you’re looking for?
Call Us
Talk to a product expert
Call us now at:
(800) 553-3332
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)
Chat With Us
Mon - Fri - 9:00 a.m 11:00 p.m (E.T)
Sat - Sun - 9:00 a.m 5:00 p.m (E.T)